Elevations
Sections
Wall sections
(A-10201)
Aluminium pergola Louvers:
Color should match the elevation color palette, not the aluminium openings.
Water Meter Location:
The water meter should be located directly on the fence or inside the corridor, not to exceed 50-70 cm from the street. (Note: always prioritize the first option as much as possible.)
Electrical Socket & Plugs:
Need to specify the following plugs https://www.instagram.com/22system?igsh=Mzh0cDYweDd5aDFq
As much as possible, the heights of the door handles, switches, thermostat, and similar items should be aligned at the same level
Stone elevation installation:
To use mineral wool / Rock wool instead of iso board (XPS) as a packing.
Horizontal joint to be 1-2mm.
Vertical joint to be 0 joint (option 1)
In case the stone type appears matching and the pattern is staggered; then vertical joint to be 1mm.
All stone description to be Cut to size, Vein match.
Please ensure the description is accurate. A stone groove is not the same as a stone gap. A gap refers to a void, while a groove is a carved indentation in the stone.
Motorized curtains & black out:
Size of the motor to be taken in consideration with the size of the cove.
Try to incorporate blackout features into the design, as this may make it easier for the client to approve, rather than using shutters.
Mashrabya Elevation:
As a design, Fixed frame of the material (Brick / Stone …etc) is required and voids of mashrabya after the frame.
External paint:
External paint to be Aplica
Glass handrail on façade:
At least 1-meter height tempered glass (not laminated).
Wall skirting:
To use Aluminium T section (customized). Skirting height 1 cm and depth 1.5cm
Electric Car Charger:
In design, use one electric car charger for every three cars, unless the client requests additional chargers
MEP service & Parapets:
Ensure that all MEP services, including the ventilation fan, are concealed from view above the parapet to maintain the visual integrity of the building's mass
Handrail:
Preferred unifying the handrail heights both internally and externally to ensure alignment and continuity.
Height of internal handrail must be min. 90cm – 1m and height of external handrail must be min. 1m – 1.2m (as per exterior alignment).
Aluminium pergola louvers:
Standard Pergola are 50mm x 150mm Aluminum tubes.
Electrical Points:
Regarding the home number or the plot number, electrical point. All projects after finishing, the clients request a backlit number for the home. Please, we have to consider the point and the location on the drawings.
Staff Bedroom:
Keep 50 in front of a window, and locate the curtain's location.
Keep 90 cm in front of the wardrobe.
Use a bigger bed block wider than 90 cm.